Wireless data logger for sensors with 0–10V output
This tempmate.®-R radio data logger can be connected to a sensor with standard 0–10V output. The measurements are transmitted directly to a PC, where they are then displayed. The measurement data is transmitted live by radio to the monitoring workstation, or is stored in the data logger until it is called up wirelessly.
Interfaces for the following sensors
- Fill level
- LGS35: Radio data logger with 0–10 volt interface
- LGS33: Radio data logger with 0–2.5 volt interface
- LGS37: Radio data logger with -50mV to +50mV interface
- Connection cable: Connect your own sensor